Clogged, running, leaking, or ready to swap it out? We fix and install toilets all over Aurora — at flat prices you see before we lift a wrench. Clogs from $129, repairs from $149, and we’ll fit a toilet you bought yourself for $199.
Grig Plumbing repairs and installs toilets across Aurora, CO at flat, upfront rates. We clear a stubborn clog for $129, handle a standard repair for $149, and set a toilet you’ve already bought for $199. No hourly meter, no padded invoice — you approve the price before we start. Call (983) 218-4929 to book.
A bad toilet has a way of taking over your whole day. Maybe it rocks every time you sit down, or it hisses half the night, or the bowl simply won’t clear. Whatever it’s doing, you don’t want a vague hourly estimate — you want a number and a fix. That’s the whole idea here. As the local plumbers in Aurora who do this every day, we show up, sort it out, and charge exactly what we said.
Most jobs fall into one of three buckets. Pick the one that sounds like yours, and that’s your price.
The bowl fills but won’t drain, and the plunger gave up. We clear the blockage and get it flushing again.
Book ThisRunning, rocking, weak flush, or a small leak. We rebuild the parts that failed so it works like new.
Book ThisBought a new one? We pull the old, set yours, seal it, and test it. Haul-away included.
Book ThisSome clogs sit too far down the trap for a plunger to reach, or they’re packed with the stuff that shouldn’t go down a toilet in the first place — wipes, cotton, a kid’s toy. We use a closet auger that snakes through the bowl without scratching the porcelain, break the blockage apart, and flush it clear.
Most toilet trouble comes down to a handful of worn parts inside the tank. A flapper that no longer seals lets water trickle into the bowl all day. A tired fill valve makes it run and refill on its own. Loose tank bolts or a cracked supply line leave a little puddle behind. We find what’s actually failing and replace it, instead of guessing.
Plenty of folks grab a toilet they like from a big-box store or online, then just need a pro to put it in right. That’s exactly what this covers. Buying the unit yourself keeps the cost down, and you still get a watertight, wobble-free install from someone who does it week in, week out. The seal and the level are what make a toilet last, and that’s the part people get wrong on their own.
Not sure which one you’re dealing with? Match your symptom to the right fix before you call.
That’s a clog ($129). One toilet affected, water rising then creeping down — it’s stuck in the trap.
That’s a repair ($149). The porcelain is fine; it’s the working parts inside that need replacing.
Time for a new toilet ($199 to fit). A cracked bowl or a 20-year-old guzzler is worth replacing, not patching.
That’s not the toilet — it points to your main sewer line. We’ll camera it and sort the real problem.
Here’s something out-of-town plumbers miss: a lot of Aurora “toilet problems” are really just hard water doing its slow damage. Knowing that saves you money, because the fix is often small.
Aurora sits on the harder end of the metro’s water. Over the years, mineral scale quietly builds up inside the rim jets under the bowl’s edge and around the fill valve in the tank. Clogged jets make the flush feel weak even when nothing is broken, and a crusted valve makes the tank run or refill slowly. Often the real fix is just clearing the scale or swapping a cheap part — not a whole new toilet. We’ll tell you honestly which one you need.
Call or message and tell us what the toilet’s doing. We’ll get you a same-day slot where we can.
Our plumber checks the bowl, tank, valve, and base to find the real cause, not just the symptom.
We confirm which flat rate applies and tell you before starting. Nothing happens until you say yes.
We clear, repair, or install, test it twice, wipe down the area, and take the old unit if there is one.
We’re based right here in Aurora and cover the whole city, plus Denver, Centennial, Parker, and the nearby metro.
A standard toilet repair is a flat $149. That covers the common fixes — a running tank, a weak flush, a worn flapper or fill valve, a broken handle, or a small leak at the bolts or supply line. Clearing a clog is $129, and installing a toilet you’ve bought yourself is $199. If we find something bigger, like a cracked flange or damaged subfloor, we’ll show you and quote it before touching it.
An occasional clog is usually just too much paper or something that shouldn’t have gone down. But if it clogs again and again, the cause is often deeper — a partial blockage further down the drain, a blocked vent that kills the flush power, or an older low-flow toilet that never had much push to begin with. When we clear it, we’ll tell you which of those you’re dealing with.
A toilet that runs and runs is almost always leaking water from the tank into the bowl. The usual culprit is a flapper that no longer seals, or a fill valve that won’t shut off at the right level. Both are quick swaps and fall under the $149 repair. Beyond the annoyance, a running toilet can quietly waste hundreds of gallons, so it’s worth fixing sooner rather than later.
Yes — that’s exactly what the $199 installation is for. You pick and buy the toilet, and we handle the labor: removing the old one, fitting a fresh wax ring and bolts, setting the new unit level, sealing it, connecting the water, and testing it. We also haul the old toilet away. Supplying your own unit is a simple way to keep the total down.
It’s worth sorting quickly. A toilet that wobbles will eventually break the seal underneath, and once that happens water seeps out at the base every flush and can rot the floor. Sometimes it’s just loose bolts, which is an easy repair. Sometimes the flange under it has failed and needs attention. We’ll check which it is and tell you straight.
A straightforward swap — old one out, new one in — usually takes about an hour to 90 minutes. It takes a little longer if the flange or shut-off valve needs work, or if the floor under the old toilet has to be looked at. We’ll give you a realistic time when we see the setup.
For a standard job, yes — the flat rate is the price. The only time it changes is if we uncover a separate problem, like a broken flange, a rotted subfloor, or a blockage that’s actually in your main drain line. In that case we stop, show you what we found, and quote that work on its own. You always approve any extra before we do it.
Yes. Grig Plumbing is a licensed, insured, owner-operated Colorado company based in Aurora. The same local plumber who gives you the price is the one who does the work — not a rotating crew from a national call centre.
One quick call and you’ll have a flat price and a time. Clogs, repairs, or a new toilet set in place — done right, done today where we can.